Theme: Track, conductor path
How can I set the spacing for two tracks?
I want to set a special minimum distance for two signals (nets).
A minimum spacing can be set in several ways. The simplest is to assign a minimum spacing to the corresponding signals. To do this, click on a green signal trace segment with M11 in the schematic or on a track segment in the PCB. In the dialog that opens, the minimum spacing for the signal is entered at the bottom.
If several signals must have the same spacing, you can create a signal class for them. You can also define different minimum distances between different classes.
A minimum distance based on production technology is, however, always entered in the Settings (Project). At "Values for Design Rule Check (DRC)" you enter the value for "Minimum track spacing ( PCB)". This is primarily used for checking (DRC, Design Rule Check).
If different minimum distances apply for the inner copper layers due to manufacturing reasons, you can enter them in the large layer dialog.
You can also make the auras of individual track segments larger. But then you have to set "Regard auras" on the right side during the check.
